Roll over image to zoom in
Cartridge Globe Valve Actuator are small electric actuators for individual room control that provide floating or modulating control of V5852, V5862 two-way or V5853, V5863 three-way valves.
- Suitable for Excel/IRC system or other controllers providing specified signals.
- Magnetic coupling for torque limitation independent of voltage supply and self-adjustment of the close-off port.
- No mounting tools required.
- Small size allows installation in limited space of fan coil units, induction units, and small reheaters or recoolers.
- Visual position indication (red pin).
|Dimensions (in.)||2 3/8 in. high x 1 15/16 in. wide x 3 15/16 in. deep|
|Dimensions (mm)||61 mm high x 49 mm wide x 100 mm deep|
|Includes||1/2 in. conduit hub|
|Used With||1/2 inch and 3/4 inch V58XX Globe Valves|
|Weight (lb)||0.35 lb|
|Weight (kg)||0.16 kg|
|Materials||Low Maintenance Plastic Housing|
|Comments||Direct/Reverse Acting Switch|
|Mounting||Threads onto V58XX valve bonnet|
|Frequency||50 Hz; 60 Hz|
|Approvals, Underwriters Laboratories Inc.||Flammability Rating UL94V-5V|
|Electrical Connections||Plenum-rated cable|
|Operating Humidity Range (% RH)||5 to 95% RH|
|Supply Voltage||24 Vac +10%, -30%|
|Power Consumption||Driving-- 1.4 VA|
|Shipping and Storage Temperature Range (F)||-40 F to +158 F|
|Shipping and Storage Temperature Range (C)||-40 C to +70 C|
|Ambient Temperature Range (F)||32 F to 122 F|
|Ambient Temperature Range (C)||0 C to 50 C|
|Environmental, Electrical or Ingress Protection Rating||IP42,Class I Insulation (24 Vac)|
|Internal Auxiliary Switch||0|
|Fluid Temperature (C)||130 C Maximum|
|Fluid Temperature (F)||266 F Maximum|
|Control Signal||0 to 10 Vdc; 2 to 10 Vdc|
|Fail Safe Mode||Stays in place|
|Torque Rating (lb-in.)||40.5 lbf|
|Torque Rating (Nm)||180 N|
|Stroke (in.)||1/4 in.|
|Stroke (mm)||6 mm|
|Cable||Threaded conduit connector|
|Timing, Nominal||Driving @ 60 Hz (sec)-- 125 sec|
|Manual operation||None (use valve dust cap)|
|Input Impedance||100K ohm|