Roll over image to zoom in
Direct wired temperature sensor used to sense discharge or return air temperature in a duct controlled by an Excel 10 Series 2000 Controller.
- Primary and/or secondary sensor for use with electronic control systems.
- Integral 20 K ohm non-linear NTC thermistor.
- Rugged aluminum insertion probe.
|Application||Primary and/or secondary sensors in electronic control systems|
|Dimensions (in.)||1 in. high x 2 in. wide x 7 in. deep|
|Dimensions (mm)||25 mm high x 51 mm wide x 177 mm deep|
|Used With||XL10, W7751|
|Comments||6 foot plenum rated cable|
|Mounting||Mounts on flat duct or plenum surface with integral mounting|
flange or in a 2 in. x 4 in. (51 mm x 102 mm) junction box.
|Operating Humidity Range (% RH)||5 to 95% RH, non-condensing|
|Sensor||20 K ohm NTC non-linear|
|Operating Temperature Range (F)||45 F to 99 F|
|Operating Temperature Range (C)||7 C to 37 C|
|Shipping and Storage Temperature Range (F)||-40 F to +150 F|
|Shipping and Storage Temperature Range (C)||-40 C to +65 C|
|Insertion Length (in.)||6 in.|
|Insertion Length (mm)||152 mm|