Roll over image to zoom in
Control central heating and cooling, fan coil systems, radiators and convectors. Depending on the model, it can be controlled by a low voltage SPST or SPDT switch, pulse-width modulated 24 Vac signal, or floating input, modulating controller.
- Use with two-way or three-way valves.
- Double insulated actuator.
- Five foot plenum-rated cable.
- Quick and easy replacement of moving parts.
- Actuator head installation does not require draining the system.
- Selectable/switchable electronic fail safe normally open or normally closed.
- Available with valve bodies with 1000-series 2-way and 6000-series 3-way cartridges for new construction.
- All VC Series actuator-valve combinations provide 60 psi close-off.
Depending on the model selected, the actuator can be controlled by a low or line voltage SPST or SPDT controller, such as a room thermostat, aquastat or flow switch.
VC80 series valve actuators are designed to be used with hard-wired electronic thermostats with series anticipator or power-stealing thermostats. Recommended control thermostats include T8601D, T8401C,T8380 and T8360 families.
VC actuators use cam-operated cartridge travel to resist water hammer. Internal limit switches prevent motor overrun.
|Dimensions (in.)||2.8 in. high x 3.7 in. wide x 2.7 in. deep|
|Dimensions (mm)||70 mm high x 94 mm wide x 68 mm deep|
|Used With||VC Series Valves, 1000 Series 2-way and 6000 Series 3-way|
|Weight (lb)||0.84 lb|
|Weight (kg)||0.38 kg|
|Approvals, Underwriters Laboratories Inc.||UL Recognized, File# MH11826|
|Approvals, Canadian Standards Association||CSA Certified: LR1322-367|
|Operating Humidity Range (% RH)||5 to 95% RH, non-condensing|
|Supply Voltage||24 Vac|
|Power Consumption||Driving-- 6 VA|
|Shipping and Storage Temperature Range (F)||-40 F to +150 F|
|Shipping and Storage Temperature Range (C)||-40 C to +65 C|
|Approvals, CE||89/336/ECC, 73/23/EEC|
|Ambient Temperature Range (F)||32 F to 150 F|
|Ambient Temperature Range (C)||0 C to 65 C|
|Switch Ratings||2.2A (5 to 110 Vac)/1.0A (110 to 277 Vac) Inductive; Min. DC switching capability: 5 mA @ 24 Vac.|
|Environmental, Electrical or Ingress Protection Rating||IP40,Double Insulated|
|Internal Auxiliary Switch||1|
|Fluid Temperature (C)||95 C|
|Fluid Temperature (F)||203 F|
|Control Signal||SPST; Two position|
|Fail Safe Mode||Stays in place|
|Stroke (in.)||0.4 in.|
|Stroke (mm)||10 mm|
|Cable||Molded strain relief|
|Timing, Nominal||Driving @ 60 Hz-- 6 sec|
|Maximum Differential Pressure Ratings (Close-off) (psi)||60 psid|
|Maximum Differential Pressure Ratings (Close-off) (kPa)||400 kPa|
|Shaft Adapter Type||Self-alignment|
|Electrical Connections (in.)||39 in.|
|Electrical Connections (mm)||1 m|