Dow Froth Pak 650 Class A (E84) Spray Foam Gun Kit
Spray Foam Gun Kit includes:
- 1 Iso (A) cylinder 340317
- 1 Polyol (B) cylinder 340320
- GHA 15 (Gun Hose Assembly, 15' Hose) - 158398
- 1 dispensing gun
- 15 ft. hose
- Assorted nozzles
- 8 Cone white spray - 187918
- 4 GG white spray - 187915
- 1 wrench
- 1 petroleum jelly packet
- 1 instruction sheet
Theoretical Field: 650 Board Feet.
Spray Foam requirements are calculated in "Board Feet". A Board Foot is simply an area of cured foam measuring 12" x 12" x 1" thickness after curing. Example: if you have a surface that is 40' x 8' and want the foam 2" thick you would need 640 board feet (40x8x2 = 640). Confused how much spray foam you need? Give us a call: (888) 405-6064.
FROTH-PAK Foam Insulation is a closed cell, two-component, quick-cure polyurethane spray foam that fills cavities, penetrations, cracks and expansion joints. Unlike one-component foam, FROTH-PAK Foam Insulation is a chemically cured foam, significantly reducing curing time. FROTH-PAK™ Foam Insulation dispenses, expands and becomes tack-free in seconds. The product will skin over in 30–40 seconds and will be completely cured in minutes.*
The Class-A rating (flame spread of 25 or less) of FROTH-PAK™ Foam Insulation allows its use in a wide range of interior and exterior industrial, commercial, institutional and residential settings. Check with local codes prior to use. If used in an exterior setting, a coating must be applied for ultraviolet (UV) protection.
Dow Froth Pak 650 Physical Properties:
FROTH-PAK™ Foam Insulation exhibits the typical properties and characteristics indicated in Table 2 when tested as represented.
Cured FROTH-PAK™ foam is combustible and will burn if exposed to open flame or sparks from high-energy sources. Do not expose to temperatures above 240°F.
Complete operating instructions are provided with each FROTH-PAK™ Foam Insulation purchase. Read all information and cautions before application. Note: Avoid overfilling restricted spaces. Chemicals exert force during reaction, and expansion of foam may result in substrate deformation.
*Actual cure time will depend on temperature, foam thickness, the specific nozzle used, etc.
If you would like to add an optional 3M safety kit to your Froth Pak package, simply select Add 3M Safety Kit from the product options and then Add to Cart. Your selections will be reflected on the check out page. Feel free to browse other Dow Froth Pak Kits.
This 3M Safety Kit Includes:
- 3M Disposable Protective Coverall Safety Work Wear
- 3M Tekk Protection Nitrile Gloves
- 3M Half Facepiece Disposable Respirator Assembly, Organic Vapor/Acid Gas Respiratory Protection , Large - 5303
- 3M Safety Splash Goggle, Clear Anti Fog Lens - 334AF
DuPont Performance Building Solutions brings together the power of two construction leaders: DuPont™ Building Envelope Solutions and Dow Building Solutions.
TYPICAL PHYSICAL PROPERTIES OF FROTH-PAK™ FOAM INSULATION
These properties are typical but do not constitute specifications.
|Property and Test Method||Value*|
|Flame Spread/Smoke Developed,(1), (2) ASTM E84/UL 723||≤25 / ≤450|
|Nominal Density, ASTM D1622, lb/ft³:||1.75|
ASTM E283, cfm/ft2 @ 1.57 psf
ASTM E2178, L/s/m2 @ 75 Pa
|Water Vapor Permeance, ASTM E96
perm @ 1" thick
perm @ 2" thick
|Water Absorption, ASTM D2842, % by volume||3.2|
|Dimensional Stability, ASTM D2126, % volume change
100°F/97% RH @ 1 wk
158°F/97% RH @ 1 wks
-40°F/amb RH @ 1 wk
158°F/amb RH @ 1 wks
|Compressive Strength, ASTM D1621, lb/in⊃, parallel||17.2|
|Tensile Strength, ASTM D1623, lb/in², parallel||32.0|
|Maximum Service Temperature, °F||240|
(1) Tested at 2" thickness, full coverage.
(2) This numerical flame spread rating is not intended to reflect hazards presented by this or any other material under actual fire conditions.
(3) R means resistance to heat flow. The higher the R-value, the greater the insulating power.
Payment & Security
Your payment information is processed securely. We do not store credit card details nor have access to your credit card information.