FROTH-PAK™ 200 Foam Sealant is a portable, two-component, spray polyurethane foam dispensing system for air sealing, insulation and moisture management around the building envelope. Reducing air leakage is critical for enhancing building envelope performance. Depending on the construction details, often a source of air leakage is around the perimeter of the building between the roof deck and parapet. Sealing this area during construction can potentially reduce costly repairs later, as well as improve building performance
FROTH-PAK Foam Insulation is a closed cell, two-component, quick-cure polyurethane spray foam that fills cavities, penetrations, cracks and expansion joints. Unlike one-component foam, FROTH-PAK Foam Insulation is a chemically cured foam, significantly reducing curing time.
For filling cavities, penetrations, cracks and expansion joints, amongst several other applications, the chemically-cured Dow Froth Pak foam has significant advantages, including a reduced curing time and a shorter wait for the foam to become tack-free. When you've run out of this great product, refillable cylinders are available.
Theoretical Yield (Board Feet)= 200 Board Feet (0.46 m3)
Spray Foam requirements are calculated in "Board Feet". A Board Foot is simply an area of cured foam measuring 12" x 12" x 1" thickness after curing. Example: if you have a surface that is 40' x 8' and want the foam 2" thick you would need 640 board feet (40x8x2 = 640). Confused how much spray foam you need? Give us a call: (888) 405-6064.
Dow Froth Pak 200 Sealant Spray Foam Kit includes:
- 1 Iso (A) cylinder
- 1 Polyol (B) cylinder
- 6 Cone white spray nozzles - 259219
- 4 Fan spray nozzles - 259216
- 9 ft. gun hose assembly (GHA)
- 1 petroleum jelly packet
Dow Froth Pak 200 Sealant Spray Foam Kit Features:
- Simple application, no complicated procedures, professional results
- Dispenses, expands and becomes tack free in seconds
- Cures in 1 minute
Froth-Pak 200 is typically used as a foam insulating sealant to fill cavities, wall and floor penetrations, and is also commonly used to repair spray-applied polyurethane applications. Froth-Pak can be used in either interior or exterior industrial, commercial, institutional and residential settings. If used in an exterior setting, a coating must be applied for UV protection.
Read all instructions and safety information (MSDS) before using any products. Foam bonds to skin quickly - wear gloves, eye protection and work clothes during application. Use drop cloths and mask work areas.
Surface should be free of oil, grease and excess moisture. For best results, apply in 24°C (75°F) temperature. Froth-Pak can be applied effectively in cold temperatures (above freezing) provided the kit contents are at least 24°C (75°F).
Dow Froth Pak 200 Sealant Spray Foam Kit Storage:
For best results, the tank contents should be at 24°C (75°F) or warmer.
NEED A SAFETY KIT?
If you would like to add an optional 3M safety kit to your Froth Pak package, simply select Add 3M Safety Kit from the product options and then Add to Cart. Your selections will be reflected on the check out page.
This 3M Safety Kit Includes:
- 3M Disposable Protective Coverall Safety Work Wear
- 3M Tekk Protection Nitrile Gloves
- 3M Half Facepiece Disposable Respirator Assembly, Organic Vapor/Acid Gas Respiratory Protection , Large - 5303
- 3M Safety Splash Goggle, Clear Anti Fog Lens - 334AF
DuPont Performance Building Solutions brings together the power of two construction leaders: DuPont™ Building Envelope Solutions and Dow Building Solutions.
TYPICAL PHYSICAL PROPERTIES OF FROTH-PAK™ FOAM SEALANT
These properties are typical but do not constitute specifications.
|Property and Test Method||Value*|
|Flame Spread/Smoke Developed,** ASTM E84/UL 723 @ 4" wide by 2" thick||≤25 / ≤450|
|Nominal Density, ASTM D1622, lb/ft³:||1.75|
|R-Value (FROTH-PAK 200)
|Water Vapor Permeance, ASTM E96, perm @ 1" thick||3.13|
|Water Absorption, ASTM D2842, % by volume||5.44|
|Air Permeability, ASTM E2178 air leakage at 1" thick, l/min @ 75 Pa||0|
|Air Permeability, ASTM E283 air leakage at 0.5" thick, ft³/min•ft² @ 75 Pa||Value 2|
|Dimensional Stability, ASTM D2126, % volume change
Dimensional Stability, ASTM D2126, % volume change
158°F/100% RH @ 1 wk
158°F/100% RH @ 2 wks
-40°F/amb RH @ 1 wk
-40°F/amb RH @ 2 wks
|Compressive Strength, ASTM D1621, lb/in⊃, parallel||23.4|
|Flexural Strength, ASTM C203, lb/in², parallel||22.7|
|Tensile Strength, ASTM D1623, lb/in², parallel||36|
|Shear Strength, ASTM C273, lb/in², parallel||12.7|
|Maximum Service Temperature, °F||240|
* Values may differ for FROTH-PAK™ 12 and specialty kits. Contact a Dow representative for more information.
** This numerical flame spread rating is not intended to reflect hazards presented by this or any other material under actual fire conditions.
*** R means resistance to heat flow. The higher the R-value, the greater the insulating power.
Payment & Security
Your payment information is processed securely. We do not store credit card details nor have access to your credit card information.