Diversitech SpeediChannel 3" Wall Penetration Cover - 230-WC3
Wall sleeves and penetration covers are used to transition from the SpeediChannel system to a through wall penetration. The wall sleeve creates a neat hole through the wall, and the line set is covered by the wall cover. DiversiTech's wall covers are designed to allow for easy installation - even after the line set has been installed. A unique hooking and fastening arrangement allows for quick and easy installation. Each wall cover is individually packed, and is furnished complete with stainless steel screws to attach the wall cover to the base. Three screws (supplied by others) are needed to fasten the wall cover to whatever type of wall construction the system is being installed on.
DiversiTech SpeediChannel™ System
DiversiTech SpeediChannel™ is an innovative channel system used to cover air conditioning line sets. The two part system has a base and a cover. The base is fastened to a wall or ceiling, then a clever little plastic clip (SpeediClip™) snaps into a channel already molded into the base. SpeediClip™ is the fastest, most convenient way to complete a line set cover installation. Then, using standard cable ties, the line set, cables, con-trol wires, and/or condensate drain line are fastened in place. The cover then simply snaps on top of the base.
The SpeediChannel™ system is available in three widths - 3", 4", and 6". Each piece of SpeediChannel™ is 6-1/2 feet long. A complete line of cou-plings, elbows, and tees are available for the SpeediChannel™ system.
Manufactured from rigid PVC, the SpeediChannel™ system is a natural color that is a very close match to the typical mini split condensing unit case. However, the SpeediChannel™ system can be painted as desired to match any wall color. The PVC used in the SpeediChannel™ system is resistant to UV light, and is UL rated.
DiversiTech recommends attaching the base to the wall or ceiling and the line sets to the system every 15" to allow for the system to carry the full weight of the line sets.
The SpeediChannel™ system can also be used inside.
SpeediClip™ simply slides into place on a railing molded into the inside of the SpeediChannel™ allowing for single person installation. Competitive products must be screwed in place which is extremely time consuming.
The SpeediChannel™ can be easily customized to any wall construction.
The original natural color blends well with almost any wall construction aesthetic.
DiversiTechs large SpeediChannel™ size is a full 6" channel unlike competitors products which are only 5-1/2".
Tight fit corner and flat bottom channel design
The flat bottom channel sits on surfaces easier and fits into corners better. It can be silicone sealed against the wall.
Stainless steel screws
Stainless steel screws will not rust.
Flat wall escutcheon
Competitive products have a larger escutcheon that is not aesthetically pleasing and wastes space.
Integrated flex joint
Competitive products require a joiner piece to couple the flex joint to their systems. The DiversiTech flex joint slides right into the end of the SpeediChannel™ with no additional joiner piece.
Long radius 90° bend
DiversiTechs long radius 90° bend allows for a larger bending radius for the line set, making installation easier.
Single piece wall sleeve 20mm drain line with double Cconnections
Competitive products are multi-part which is cumbersome.
True Y connection
Drainline Y is inline. It does not branch.
|Dimensions (L W H)||7.5 X 5.5 X 3.5|
Mini Split System with 3/8" Insulation
- Liquid Line:3/8"
- Suction Line: 5/8"
- Drain Hose: 3/4" OD
Conventional Split System with 3/8" Insulation on Suction Line:
- Liquid Line: 3/8"
- Suction Line:3/8" or 7/8"
- Drain Hose: 3/4" PVC
- Meets UL 94V -0 Fire rating
- Temperature: -4°F to 140°F
- Tested to over 2,000 hours