Protective Housing ZS-260 For GK, GM, AM, AF, NF, NK, LF FSAF, FSNF, FSLF Series Acutators
The ZS-260 explosion-proof housing may be used with the GK, GM, AM, AF, NF, NK, LF, FSAF, FSNF, FSLF series actuators. This housing is not designed for direct coupling. UL and CSA; Class I, Zone 1&2, Groups B, C, D, (NEMA 7), Class II, Division 1&2, Groups E, F and G, (NEMA 9), Class III, Hazardous (classified) Locations, outdoor application NEMA 4.
The ZS-260 enclosure is designed so that the required actuator may be easily field mounted into the enclosure. The actuator is fastened on to the internal portion of the operating shaft and secured at the end with an anti-rotation strap. A crank-arm, such as the KH8, is mounted to the external portion of the operating shaft for connection to connection to the damper linkage. ZG-109 right angle, and ZG-110 standoff mounting brackets may be used (see back). The ZS-260 is designed so that the operating shaft can be mounted on either the front or rear side of the housing.
|Material||Housing: cast, copper-free, aluminum
Cover bolts: stainless steel
Operating shaft: stainless steel
|Conduit Holes||3/4" - 14 NPT (2 supplied) see Note 1|
|Operating Shaft Diameter||1/2 inch [12.7]|
|Operating Shaft Location||Front or rear side of housing (field selected)|
|Housing Cover Bolts||3/8”-16 x 1.5” SS|
|Approved Applications||UL and CSA; Class I, Zone 1&2, Groups B, C, D, (NEMA 7),
Class II, Zone 1&2, Groups E, F and G, (NEMA 9),
Class III, Hazardous (classified) Locations, outdoor application NEMA 4.
|Weight||31.0 lb. (14.0 kg) without actuator|
Note 1: Fittings that meet the requirements of the hazardous location must be used. All applications must comply with applicable local and/or national electric code.
Note: Since conditions of use of this product are outside the control of Belimo, the purchaser should determine suitability of the product for their intended use, and assumes all risk and liability in connection therewith.