Torque min. 35 in-lb, for control of air dampers.
For On/Off, fail-safe control of dampers in HVAC systems. Actuator sizing should be done in accordance with the damper manufacturer’s specifications. Control is On/Off from an auxiliary contact or a manual switch. The actuator is mounted directly to a damper shaft from 3/8” up to 1/2” in diameter by means of its universal clamp, 1/2” shaft centered at delivery. For shafts up to 3/4” use K6-1 accessory. A crank arm and several mounting brackets are available for applications where the actuator cannot be direct coupled to the damper shaft.
The LF series actuators provide true spring return operation for reliable fail-safe application and positive close off on air tight dampers. The spring return system provides consistent torque to the damper with, and without, power applied to the actuator. The LF series provides 95° of rotation and is provided with a graduated position indicator showing 0° to 95°. The actuator may be stalled anywhere in its normal rotation without the need of mechanical end switches. Power consumption is reduced in holding mode. The actuator is double insulated so an electrical ground connection is not necessary.
|Angle of Rotation||95°|
|Direction of Rotation (Fail-Safe)||Reversible with cw/ccw mounting|
|Power Consumption (Holding)||2.5 W|
|Actuator Type||Spring return|
|Degree of Protection||
|Power Consumption (Running)||5 W|
|Running Time (Fail-safe)||<25 s|
|Running Time (Motor)||75 s|
|Torque||35 in-lb [4 Nm]|
|Voltage AC/DC||AC/DC 24 V|