The AirCycler® g2 System is the industry’s most efficient and economical solution for meeting all whole house mechanical ventilation standards. By maximizing the efficiency of central furnace fan integrated ventilation - using a home’s regular heating and cooling cycles to provide supply ventilation - and exhaust fan ventilation, the AirCycler® g2 System delivers fresh air throughout the home with precise control and energy savings.
FEATURES & BENEFITS
- Hybrid whole house/exhaust ventilation system
- Lowest HERS score
- Recommended by building scientists and engineers
- Direct replacement for AirCycler? FRV
- Works with any 24VAC damper
- Can control a 110VAC exhaust fan
- Features programmable hours of operation
- Available with rangehood exhaust tie-in and temperature control
The AirCycler® g2-k Whole House Mechanical Ventilation System includes the AirCycler® g2 Furnace Fan Timer, FanConnect™ Bath/Fan Light Switch with remote fan control, and a motorized fresh air damper (available in four sizes). This system provides both whole house supply and exhaust ventilation.
The AirCycler® g2 Furnace Fan Timer is integrated with the home’s central furnace fan so that any time the central fan is turned on by the thermostat to provide heating or cooling, the AirCycler® g2 opens the motorized damper to let in a measured amount of fresh air. The fresh air is then distributed uniformly throughout the home through the existing ductwork. When ventilation requirements are met, the damper is closed to prevent over-ventilation.
By running the ventilation system at the same time as the home’s regular heating and cooling cycles, the AirCycler® g2-k System saves on additional utility costs.
Should regular heating and cooling cycles not run long enough to meet the desired or required ventilation, the AirCycler® g2 can turn on the smaller and more economical bathroom exhaust fan (or other exhaust fan) through the optional FanConnect™ Switch. With no need to run the large central fan to provide additional ventilation, homeowner complaints of cold air or noisy operation are eliminated and efficiency is drastically improved.
|AirCycler g2 Furnace Fan Timer:|
|Operating Voltage||24 VAC (up to 30 VAC max)|
|Current Draw||0.07 Amps|
|Motorized Fresh Air Damper:|
|Operating Voltage||24VAC (up to 30 VAC max)|
|Current Draw||0.07A idle, 0.125A for 15 sec|
damper transit time
|Power Draw (VA)||1W idle, 3W for 15 sec|
damper transit time
|Wiring Requirements||18 guage, min|
Includes pigtail and damper plug for wiring
Can be installed in any position
|Light||450 Watts @ 120 VAC (blue wire)|
|Fan||150 Watts @ 120 VAC (red wire)|
|Operation||120 VAC ± 10%|
HRV/ERV SYSTEM vs AIRCYCLER G2 WHOLE HOUSE VENTILATION SYSTEMOperation Time & Energy Use to Reach 1,800 CF Fresh Air
Use the AirCycler g2 with your existing HVAC system to gain efficiency and save on ventilation costs.
|AirCycler® g2-K Whole House Ventilation System:|
|AC-G2K-04||AirCycler® g2 Controller FanConnect™ Switch 4” Motorized Damper|
|AC-G2K-06||AirCycler® g2 Controller FanConnect™ Switch 6” Motorized Damper|
|AC-G2K-08||AirCycler® g2 Controller FanConnect™ Switch 8” Motorized Damper|
|AC-G2K-10||AirCycler® g2 Controller FanConnect™ Switch 10” Motorized Damper|
Payment & Security
Your payment information is processed securely. We do not store credit card details nor have access to your credit card information.