The AirCycler® g2 Furnace Fan Timer is the leading solution for meeting whole house ventilation standards.
Offering the most effective use of central furnace fan integrated ventilation in the industry, the AirCycler® g2
uses regular heating and cooling cycles to circulate fresh air effectively and effciently and also offers optional
remote fan control for added exhaust ventilation.
Features & Benefits
- Direct replacement for the AirCycler® FRV controller
- Combines supply and exhaust ventilation
- Low HERS Index Score
- Helps meet ASHRAE 62.2 ventilation standards
- Patented algorithm offers precise ventilation control
- Provides bath fan delay timer functions
- Features programmable hours of operation
The AirCycler® g2 Furnace Fan Timer is a ventilation controller with optional outputs for operating a motorized fresh air damper and the FanConnect™ Bath/Fan Light Switch*. This product provides whole house supply ventilation through central furnace fan integration, with the option to add remote exhaust fan control for hybrid supply-exhaust or balanced ventilation.
During installation, ventilation requirements are set by entering the measured airflow and airflow required by
code (Calculated Flow Setup), or by entering the desired amount of ventilation per hour (Calculated Time Setup). The AirCycler® g2 is integrated with the central furnace fan so that any time the central fan is turned on by the thermostat to provide heating or cooling, the AirCycler® g2 opens a motorized fresh air damper. The fresh air is then distributed uniformly throughout the home through the existing ductwork. Once the ventilation requirements are met, the fresh air damper is closed to prevent over-ventilation.
Through a patented algorithm, the AirCycler® g2 logs the ventilation time elapsed during heating or cooling cycles and compares it with the total ventilation requirements set. The AirCycler® g2 then calculates whether or not hourly requirements have been met. If not, the AirCycler® g2 will power on the central fan or if used with the optional FanConnect™ Switch, a smaller bathroom exhaust fan, to complete required ventilation.
With exhaust-only ventilation, air is being exhausted but there is no control of where the new air originates. With the AirCycler® g2, anytime the optional exhaust fan is on the motorized fresh air damper is opened, regardless of whether or not the central fan is running. This provides a known good source of fresh air.
|AirCycler g2 Furnace Fan Timer:|
|Operating Voltage||24 VAC (up to 30 VAC max)|
|Current Draw||0.07 Amps|
|Two Setup Options||Calculated Time or Calculated CFM|
|Optional Damper||24 VAC (up to 30 VAC max)|
|Optional FanConnect™ Switch||120VAC ± 10%|
Payment & Security
Your payment information is processed securely. We do not store credit card details nor have access to your credit card information.